Computer Science – Robotics
Scientific paper
Dec 1992
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1992asee.nasas....r&link_type=abstract
In its 1992 NASA/ASEE Summer Faculty Fellowship Program 5 p (SEE N93-17279 05-80)
Computer Science
Robotics
Electron Beam Welding, Heavy Lift Launch Vehicles, Large Space Structures, Manned Space Flight, Robotics, Trusses, Welded Joints, Costs, Dynamic Structural Analysis, Maintenance, Robots, Space Shuttle Orbiters, Structural Vibration, Vibration Damping
Scientific paper
In the future, some spacecraft will be so large that they must be assembled on-orbit. These spacecraft will be used for such tasks as manned missions to Mars or used as orbiting platforms for monitoring the Earth or observing the universe. Some large spacecraft will probably consist of planar truss structures to which will be attached special purpose, self-contained modules. The modules will most likely be taken to orbit fully outfitted and ready for use in heavy-lift launch vehicles. The truss members will also similarly be taken to orbit, but most unassembled. The truss structures will need to be assembled robotically because of the high costs and risks of extra-vehicular activities. Some missions will involve very large loads. To date, very few structures of any kind have been constructed in space. Two relatively simple trusses were assembled in the Space Shuttle bay in late 1985. Here the development of a design of a welded joint for on-orbit, robotic truss assembly is described. Mechanical joints for this application have been considered previously. Welded joints have the advantage of allowing the truss members to carry fluids for active cooling or other purposes. In addition, welded joints can be made more efficient structurally than mechanical joints. Also, welded joints require little maintenance (will not shake loose), and have no slop which would cause the structure to shudder under load reversal. The disadvantages of welded joints are that a more sophisticated assembly robot is required, weld flaws may be difficult to detect on-orbit, the welding process is hazardous, and welding introduces contamination to the environment. In addition, welded joints provide less structural damping than do mechanical joints. Welding on-orbit was first investigated aboard a Soyuz-6 mission in 1969 and then during a Skylab electron beam welding experiment in 1973. A hand held electron beam welding apparatus is currently being prepared for use on the MIR space station.
No associations
LandOfFree
Design of a welded joint for robotic, on-orbit assembly of space trusses does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Design of a welded joint for robotic, on-orbit assembly of space trusses, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design of a welded joint for robotic, on-orbit assembly of space trusses will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1113745