Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability

Details Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability

Aug 2008

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7012e..35m&link_type=abstract

Ground-based and Airborne Telescopes II. Edited by Stepp, Larry M.; Gilmozzi, Roberto. Proceedings of the SPIE, Volume 7012, p

Physics

2

Scientific paper

To meet the 10 µm RMS half wavefront error requirement for the 25 m diameter Cornell Caltech Atacama Telescope (CCAT), active control of the approximately 200 primary mirror panels is required. The CCAT baseline design includes carbon fiber aluminum honeycomb sandwich mirror panels. Distortions of the panels due to thermal gradients, gravity and the mounting scheme need to be taken into consideration in the control system design. We have modeled the primary mirror surface as both flat and curved surfaces and have investigated mirror controllability with a variety of sensor types and positions. To study different mirror segmentation schemes and find acceptable sensor configurations, we have created a software package that supports multiple segment shapes and reconfigurable panel sizing and orientation. It includes extensible sensor types and flexible positioning. Inclusion of panel and truss deformations allows modeling the effects of thermal and gravity distortions on mirror controllability. Flat mirrors and curved mirrors with the correct prescription give similar results for controlled modes, but show significant differences in the unsensed flat mirror modes. Both flat and curved mirror models show that sensing schemes that work well with rigid, thermally stable panels will not control a mirror with deformable panels. Sensors external to the mirror surface such as absolute distance measurement systems or Shack-Hartmann type sensors are required to deal with panel deformations. Using a combination of segment based sensors and external sensors we have created a promising prototype control system for the CCAT telescope.

Affiliated with

Also associated with

No associations

Rating

Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Cornell Caltech Atacama Telescope primary mirror surface sensing and controllability will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1810459