Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection

Details Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection

2005-01-10

arxiv.org/abs/physics/0501046v1

Physics

Space Physics

2 pages

Scientific paper

Orbital debris is a constraint on the long-term health of any spacecraft and must be considered during mission planning. Varying mechanisms have been proposed to quantify the problem. Assessment of orbital debris employing ground-based methods such as radar can help determine where debris clouds are located as well as their density or orbital trajectory. Such data is invaluable to computer simulations and can allow predictions of the debris environment over specific time periods [1]. Accurate in-situ data is essential as well with various types of sensors designed to detect orbital debris impacts employed on space missions since the 1950's [2]. One of the most common of these is the PZT (piezoelectric lead zirconate titanate) which is often used in-situ to measure the momentum of a particle at the time of impact. This paper will discuss a multiple PZT sensor system capable of determining both impactor momentum and location currently in development within CASPER.

Affiliated with

Also associated with

No associations

Rating

Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-125415