Conceptual designs of dipole magnet for muon collider ring

Details Conceptual designs of dipole magnet for muon collider ring Conceptual designs of dipole magnet for muon collider ring

2012-02-10

arxiv.org/abs/1202.2380v1

IEEE Trans.Appl.Supercond. 21 (2011) 1825-1828

Physics

Accelerator Physics

4 pp. Applied Superconductivity Conference (ASC 2010), 1-6 Aug 2010: Washington, D.C

Scientific paper

Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles for the Muon Collider should be able to handle ~0.5 kW/m of dynamic heat load from the muon beam decays. The magnets are based on Nb3Sn superconductor and designed to provide an operating field of 10 T in the 20-mm aperture with the critical current margin required for reliable machine operation. The magnet cross-sections were optimized to achieve the best possible field quality in the aperture occupied by beams. The developed mechanical structures provide adequate coil prestress and support at the maximum level of Lorentz forces in the coil. Magnet parameters are reported and compared with the requirements.

Affiliated with

Also associated with

No associations

Rating

Conceptual designs of dipole magnet for muon collider ring does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Conceptual designs of dipole magnet for muon collider ring, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Conceptual designs of dipole magnet for muon collider ring will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-237658