Physics – Optics
Scientific paper
Jul 2000
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2000spie.4003..391n&link_type=abstract
Proc. SPIE Vol. 4003, p. 391-395, Optical Design, Materials, Fabrication, and Maintenance, Philippe Dierickx; Ed.
Physics
Optics
Scientific paper
After the initial coating of the 8.3-m primary mirror of the Subaru Telescope in November 1998, we have conducted the first re-aluminization in August 1999. The primary mirror washing fixture worked efficiently for stripping the old coating and for washing the surface. Dry process is still to be improved. Suite of secondary and tertiary mirrors are being tested at the telescope, two of which were coated in- house, one in silver for the infrared observations and the other in aluminum for the optical observations, respectively. Evaluation of the coating film is conducted in two methods. Using a portable microScan, the reflectivity and the BRDF numbers of the primary mirror is monitored. Reflectivity over a wide range of the wavelength is measured in the witness mirrors. The preliminary data shows reasonably good number for the telescope optics. The in-situ cleaning of the primary mirror with solid and gaseous CO2 sprinkle arms is operating once every month. Next step for the coating chamber commissioning is to improve the heating capacity for silver coating of the infrared secondary and tertiary mirrors, and the experiment for silver coating is going.
Hayashi Saeko Suzuki
Imi Katsumi
Ishikawa Tsuyoshi
Kamata Yukiko
Kanzawa Tomio
No associations
LandOfFree
Coating and cleaning of the Subaru Telescope mirrors does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Coating and cleaning of the Subaru Telescope mirrors, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Coating and cleaning of the Subaru Telescope mirrors will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1480449