Astronomy and Astrophysics – Astronomy
Scientific paper
Jul 2006
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006spie.6275e..46w&link_type=abstract
Millimeter and Submillimeter Detectors and Instrumentation for Astronomy III. Edited by Zmuidzinas, Jonas; Holland, Wayne S.; W
Astronomy and Astrophysics
Astronomy
2
Scientific paper
We present the results of characterization measurements on a 1280 pixel superconducting bolometer array designed for operation at wavelengths around 450 μm. The array is a prototype for the sub-arrays which will form the focal plane for the SCUBA-2 sub-mm camera, being built for the James Clerk Maxwell Telescope (JCMT) in Hawaii. With over 10 000 pixels in total, it will provide a huge improvement in both sensitivity and mapping speed over existing instruments. The array consists of molybdenum-copper bi-layer TES (transition edge sensor) pixels, bonded to a multiplexer. The detectors operate at a temperature of approximately 175 mK, and require a heat sink at a temperature of approximately 60 mK. In contrast to previous TES arrays, the multiplexing elements are located beneath each pixel (an "in-focal plane" configuration). We present the results of electrical and optical measurements, and show that the optical NEP (noise equivalent power) is less than 1.4 × 10-16 W Hz-0.5 and thus within the goal of 1.5 × 10-16 W Hz-0.5.
Ade Peter A. R.
Amiri Mandana
Bintley Dan
Burger Bryce
Dunare Camelia C.
No associations
LandOfFree
Characterization of a prototype SCUBA-2 1280-pixel submillimetre superconducting bolometer array does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Characterization of a prototype SCUBA-2 1280-pixel submillimetre superconducting bolometer array, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Characterization of a prototype SCUBA-2 1280-pixel submillimetre superconducting bolometer array will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1893748