Calibration of a zone plate for an EUV solar irradiance monitor

Details Calibration of a zone plate for an EUV solar irradiance monitor Calibration of a zone plate for an EUV solar irradiance monitor

Aug 2009

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2009spie.7438e..28s&link_type=abstract

Solar Physics and Space Weather Instrumentation III. Edited by Fineschi, Silvano; Fennelly, Judy A. Proceedings of the SPIE, Vol

Physics

Scientific paper

A 4 mm diameter zone plate was calibrated in the 7 nm to 18.5 nm wavelength range using synchrotron radiation. The efficiency in the focused 1st order was measured using the scanning monochromator at the Naval Research Laboratory beamline X24C at the National Synchrotron Light Source. The measured efficiencies were compared to efficiencies calculated by accounting for the partial transmittance through the molybdenum zone plate rings and the resulting phase enhancement of the efficiencies. Accurate absolute efficiency calibrations enable the use of zone plates in EUV solar irradiance monitors having excellent stability against contamination and oxidation.

Affiliated with

Also associated with

No associations

Rating

Calibration of a zone plate for an EUV solar irradiance monitor does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Calibration of a zone plate for an EUV solar irradiance monitor, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Calibration of a zone plate for an EUV solar irradiance monitor will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1303501