Calcium diffusion in a simple silicate melt to 30 kbar

Physics

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

15

Scientific paper

Calcium-45 was used as a radiotracer to measure self-diffusion coefficients for Ca in a sodium-calcium-aluminosilicate melt (29% Na 2 O, 5% CaO, 10% Al 2 O 3 , 56% SiO 2 ) at temperatures in the range 1100-1400°C and pressures to 30 kbar. Calcium diffusivity ( D Ca ) was found to depend upon both temperature and pressure in a complex but systematic manner: ( D Ca / P ) T is always negative and has a larger absolute value at lower temperatures; ( D Ca / T ) P is positive and increases with increasing pressure. The overall dependence of D Ca upon T and P is given approximately by D caT . P = [0.0025 exp (-23,107/ RT )] exp [ P (0.7297 T - 1261.32)/ RT ]. When expressed in terms of volume ( V a ) and energy ( E ) of activation, the results are as follows: V a ranges from 2.2 cm 3 /mole at 1400°C to 11.9 cm 3 /mole at 1100°C. and E ranges from 25.4 kcal/mole (1 kban to 49.8 kcal/mole (20 kbar). From the systematic dependence of D Ca upon T and P , it is concluded that diffusion of Ca 2+ in silicate melts does not take place by means of a vacant site mechanism, but is controlled instead by the amount and distribution of free volume in the melt structure. If it is assumed that the viscosity of the melt used in this study decreases with increasing pressure ( , 1976, J. Geophys. Res. 81 , 6351-6356) as D Ca does, then the Stokes-Einstein inverse relation between viscosity and diffusivity is clearly violated, and its validity for silicate melts must be questioned. Thus, it appears that in silicate melts, unlike many liquids, viscous flow and diffusion are fundamentally different transport processes, involving different structural units. The effect of pressure on calcium diffusion is too small to invalidate kinetic models of upper mantle processes that have been based upon diffusivity values measured at 1 atm. Pressure may, however, induce significant reductions in the diffusion rates of large ions such as Rb + or SiO 4- 4 in silicate melts.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Calcium diffusion in a simple silicate melt to 30 kbar does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Calcium diffusion in a simple silicate melt to 30 kbar, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Calcium diffusion in a simple silicate melt to 30 kbar will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1650994

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.