Physics – Accelerator Physics
Scientific paper
2000-08-16
eConf C000821:MOC11,2000
Physics
Accelerator Physics
3 pages, 3 figures, LINAC2000 paper MOC11
Scientific paper
Electromagnetic modeling with MAFIA of the combined beam position-phase monitors (BPPMs) for the Spallation Neutron Source (SNS) linac has been performed. Time-domain 3-D simulations are used to compute the signal amplitudes and phases on the BPPM electrodes for a given processing frequency, 402.5 MHz or 805 MHz, as functions of the beam transverse position. Working with a summed signal from all the BPPM electrodes provides a good way to measure accurately the beam phase. While for an off-axis beam the signal phases on the individual electrodes can differ from those for a centered beam by a few degrees, the phase of the summed signal is found to be independent of the beam transverse position inside the device. Based on the analysis results, an optimal BPPM design with 4 one-end-shorted 60-degree electrodes has been chosen. It provides a good linearity and sufficient signal power for both position and phase measurements, while satisfying the linac geometrical constrains and mechanical requirements.
No associations
LandOfFree
Beam Position-Phase Monitors for SNS Linac does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Beam Position-Phase Monitors for SNS Linac, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Beam Position-Phase Monitors for SNS Linac will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-674280