Physics
Scientific paper
Aug 2011
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2011pepi..187..310m&link_type=abstract
Physics of the Earth and Planetary Interiors, Volume 187, Issue 3, p. 310-321.
Physics
Scientific paper
A detailed rock-magnetic and archeointensity study was carried out on materials baked by a western Mexican artisan following traditional techniques to produce faithful reproductions of archeological pieces of the Michoacán region (Western Mesoamerica). The field strength at the site (41.0 ± 0.5 μT) was measured with a fluxgate magnetometer and the temperature of the furnace during the baking process was monitored continually by means of a thermocouple placed in the middle of the baking cavity.Rock-magnetic experiments performed on the raw material (clay and paste) and on insitu prepared baked ceramics and bricks included measurement of thermomagnetic curves (susceptibility and strong-field magnetization versus temperature), first-order reversal curves (FORC), anisotropy of magnetic susceptibility (AMS) and anisotropy of thermoremanent magnetization (A-TRM). Magnetite and probably hematite are present in the samples as carriers of the remanence. Hysteresis ratios suggest that the samples fall in the pseudo-single-domain grain size region, which may indicate a mixture of multi-domain and a significant amount of single-domain grains.Ceramic pieces and brick fragments were subjected to the Thellier-Coe archeointensity method and to an alternative paleointensity experiment, with a TRIAXE magnetometer, in order to check whether they are faithful recorders of the local geomagnetic field strength.Mean raw-intensity of sample M1 (pottery) overestimates a 7% the expected site intensity, while those corresponding to the brick samples (LQ1 and LQ2) underestimate it 15%. Brick sample LNQ shows a slightly lower intensity (7%), but agrees with the expected site intensity within the experimental uncertainty. The intensity retrieved from the volcanic fragment also included closely reproduces the expected intensity. After A-TRM and cooling-rate corrections, all mean raw values move closer to the expected intensity.Measurement of temperatures at different parts inside the kiln (bottom and upper parts of both central and peripheral parts) revealed the existence of significant thermal gradients, similar to those observed in ovens from other localities. Different cooling rates are then expected in a single oven.The scatter in the intensity determinations observed in this study, retrieved from pieces elaborated together in the same oven, could arise from this differentiated cooling rate within the oven and thus, to an inappropriate cooling rate correction in the archeointensity protocol. As this situation was probably reproduced in the baking of ancient ceramic artifacts, a better knowledge of the temperature distribution inside these types of kiln would be desirable in order to choose the appropriate cooling rate correction.
Aguilar-Reyes Bertha
Calvo-Rathert Manuel
Camps Pierre
Carvallo Claire
Goguitchaichvili Avto
No associations
LandOfFree
Are ceramics and bricks reliable absolute geomagnetic intensity carriers? does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Are ceramics and bricks reliable absolute geomagnetic intensity carriers?, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Are ceramics and bricks reliable absolute geomagnetic intensity carriers? will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1666485