Architecture of a Silicon Strip Beam Position Monitor

Details Architecture of a Silicon Strip Beam Position Monitor Architecture of a Silicon Strip Beam Position Monitor

2010-10-28

arxiv.org/abs/1010.5991v1

JINST 5:C12039,2010

Physics

Instrumentation and Detectors

Submitted to TWEPP 2010

Scientific paper

10.1088/1748-0221/5/12/C12039

A collaboration between Fermilab and the Institute for High Energy Physics (IHEP), Beijing, has developed a beam position monitor for the IHEP test beam facility. This telescope is based on 5 stations of silicon strip detectors having a pitch of 60 microns. The total active area of each layer of the detector is about 12x10 cm2. Readout of the strips is provided through the use of VA1` ASICs mounted on custom hybrid printed circuit boards and interfaced to Adapter Cards via copper-over-kapton flexible circuits. The Adapter Cards amplify and level-shift the signal for input to the Fermilab CAPTAN data acquisition nodes for data readout and channel configuration. These nodes deliver readout and temperature data from triggered events to an analysis computer over gigabit Ethernet links.

Affiliated with

Also associated with

No associations

Rating

Architecture of a Silicon Strip Beam Position Monitor does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Architecture of a Silicon Strip Beam Position Monitor, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Architecture of a Silicon Strip Beam Position Monitor will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-584108