Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage

Details Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage

Apr 2006

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006joptt..73..276y&link_type=abstract

Journal of Optical Technology, vol. 73, Issue 4, pp.276-280

Physics

Scientific paper

This paper discusses two ways to shape the 1.7-m-diameter primary mirror of the T-170M telescope of the Spectrum-UV Project. Various versions of the unloading of the primary mirror in a processing mount at its fabrication stage are analyzed. Finite-element modeling is used to obtain the strains of the optical surface of the mirror for different versions of process unloading. The influence of residual strains of the mirror's optical surface on the image quality is estimated.

Affiliated with

Also associated with

No associations

Rating

Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Analysis of the strain of the primary mirror of the T-170M telescope of the Spectrum-UV Project at the fabrication stage will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1502170