Physics – Optics
Scientific paper
Sep 1994
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1994spie.2266..143n&link_type=abstract
Proc. SPIE Vol. 2266, p. 143-151, Optical Spectroscopic Techniques and Instrumentation for Atmospheric and Space Research, Jinxu
Physics
Optics
Scientific paper
The wavelength region surrounding 1.0 micrometers has traditionally been a difficult one to observe. GaAs and silicon both have very low quantum efficiency in the NIR, while some improvements can be made by pre-flashing and oxygen soaking a silicon CCD. Greater improvement can be realized by using a material other then silicon as a substrate. Recently, detector technology has improved to the point where NIR observations can be made almost routinely. Scientifically, the NIR region is ideal for the study of molecular line and band emission, as well as low energy atomic transitions. A collaboration between Boston University and the Aerospace Corporation has resulted in a germanium based detector used in conjunction with an infrared optimized Fabry-Perot spectrometer. Gold plated mirrors were installed and the appropriate transmissive optics are used in the Fabry-Perot to optimize the NIR transmission. The detector is a germanium PIN diode coated with a layer of silicon-nitride. Current produced by the detector is measured by using a capacitive trans-impedance amplifier (CITA). An A/D converter samples the amplified capacitor voltage and outputs a 12 bit word that is then passed on to the controlling computer system. The detector, amplifier, and associated electronics are mounted inside a standard IR dewar and operated at 77 degree(s)K. We have operated this detector and spectrometer system at Millstone Hill for about 6 months. Acceptable noise characteristics, a NEP of 10(superscript -17) watts, and a QE of 90% at 1.2 micrometers , have been achieved with an amplifier gain of 200. The system is currently configured for observations of thermospheric helium, and has made the first measurement of the He 10,830 angstrom nightglow emission isolated from OH contamination. In an effort to both increase the sensitivity of our Fabry-Perot in the visible and to adapt it for planetary astronomy we have entered into a collaboration with CIDTEC. A charge injection detector or CID has some unique capabilities that distinguish it from a CCD and we are evaluating it as a detector for the Hadinger fringe pattern produced by a Fabry-Perot. The CID allows non- destructive readout and random access of individual pixels within the entire frame, this allows for both `electronic masking' of bright objects and allows each fringe to be observed without having to readout a large number of dark pixels.
Hecht James H.
Kerr Robert B.
Noto John
Rudy Richard J.
Williams Richard
No associations
LandOfFree
Aeronomical application of a germanium near infrared (NIR) detector does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Aeronomical application of a germanium near infrared (NIR) detector, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Aeronomical application of a germanium near infrared (NIR) detector will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1712984