Physics
Scientific paper
Sep 2003
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2003spie.5092...52s&link_type=abstract
Technologies for Synthetic Environments: Hardware-in-the-Loop Testing VIII. Edited by Murrer, Robert Lee, Jr. Proceedings of
Physics
Scientific paper
The next generation of resistively heated emitter pixels is expected to attain apparent temperatures more than a factor of two higher than presently achievable in excess of 2000 K. The peak temperatures for the current generation of devices are determined by the balance between the power input to the pixel and the conductive loss of heat through the leg structures. At pixel temperatures higher than approximately 1500-2000 K, radiative losses will begin to dominate over conductive losses. We explore the physics of this regime and find that the peak temperature is determined primarily by the power input, emissivity and emitting area. The speed of radiatively limited pixels is also examined and found to be considerably more complicated than that of conductively limited pixels since both loss terms play significant roles in the pixel"s dynamic behavior. In order to attain the higher temperatures required, development work will be required on two fronts: materials science and advanced, higher power drive circuitry. Some of the critical issues related to these tasks are discussed.
Bryant Paul T.
Solomon Steven L.
No associations
LandOfFree
Adventures in high-temperature resistive emitter physics does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Adventures in high-temperature resistive emitter physics, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Adventures in high-temperature resistive emitter physics will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1089764