A conventional positron source for International Linear Collider

Details A conventional positron source for International Linear Collider A conventional positron source for International Linear Collider

2011-10-07

arxiv.org/abs/1110.1450v3

Physics

Accelerator Physics

15 pages, 9 figures, 1 table

Scientific paper

A possible solution to realize a conventional positron source driven by a several-GeV electron beam for the International Linear Collider is proposed. A 300 Hz electron linac is employed to create positrons with stretching pulse length in order to cure target thermal load. ILC requires about 2600 bunches in a train which pulse length is 1 ms. Each pulse of the 300 Hz linac creates about 130 bunches, then 2600 bunches are created in 63 ms. Optimized parameters such as drive beam energy, beam size, and target thickness, are discussed assuming a L-band capture system to maximize the capture efficiency and to mitigate the target thermal load. A slow rotating tungsten disk is employed as positron generation target.

Affiliated with

Also associated with

No associations

Rating

A conventional positron source for International Linear Collider does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with A conventional positron source for International Linear Collider, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A conventional positron source for International Linear Collider will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-132545