Physics – Optics
Scientific paper
Jan 1998
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1998stin...9940924w&link_type=abstract
Technical Report, Arizona Univ. Tucson, AZ United States Steward Observatory
Physics
Optics
Design Analysis, Heterodyning, Arrays, Receivers, Hot Electrons, Bolometers, Low Noise, Antenna Feeds, Fabrication, Acousto-Optics, Atmospheric Chemistry, Broadband, Carbon Dioxide Lasers, Cost Effectiveness, Interstellar Matter, Laser Machining, Micromachining, Molecular Gases, Time Measurement
Scientific paper
We proposed to perform a comprehensive design study of a 16-element heterodyne array receiver for SOFIA. The array was designed to utilize hot-electron bolometers in an efficient, low-cost waveguide mount to achieve low noise performance between approx. 1500 and 2400 GHz. Due to the prevailing physical conditions in the interstellar medium, this frequency range is one of the richest in the FIR portion of the spectrum. An array designed for this wavelength range will make excellent use of the telescope and the available atmospheric transmission, and will provide a new perspective on stellar, chemical, and galaxy evolution in the present as well as past epochs. A few of the most important molecular and atomic species which the instrument will sample are CII, OI, CO, OH, NII, and CH. The system used the most sensitive detectors available in an efficient optical system. The local oscillator was a compact CO2 pumped far-infrared laser currently under development for SOFIA. The backend spectrometer was an array acousto-optic spectrometer (aAOS). The spectrometer utilizes proven hardware and technologies to provide broadband performance (greater than or equal to 1 GHz per AOS channel) and high spectral resolution (1 MHz) with the maximum sensitivity and minimum complexity and cost. The proposed instrument would be the fastest and most sensitive heterodyne receiver ever to operate in the 1.5 - 2.4 THz band. One of the key technologies developed for the proposed instrument is the laser micromachining of waveguide structures. These structures provide both the optical link between the instrument and the telescope (via an array of efficient feedhorns) and the impedance transformation between the detectors and free space. With the assistance of funds provided from this grant, we were able to fabricate and test the world's first laser micromachined feedhorns. Figure 1 is a photograph of the 2 THz double feedhorn structure designed and constructed under the auspices of this grant. The quality of the waveguide structure is far better than that obtainable using any other fabrication technique. Figure 2 is the beam pattern obtained from it. The beam parameters are an excellent match to what is expected from theory. The success of this experiment demonstrates the viability of using laser micromachined components in the development of high performance, large format array receivers. Figure 3 is an illustration of the focal plane array concept we developed lot- SOFIA base upon this work. Un- fortunately, our instrument proposal was not selected as a first generation SOFIA instrument. However, we have continued our development efforts and will propose to build a 2nd generation instrument based on the same design concepts. Our work under NAG 2-1057 was very rewarding and we appreciate the opportunity provided by NASA to pursue it. The research led directly to publishing 2 papers (listed below) and the award of an NSF grant to our group to construct a laser micromachining system on the University of Arizona campus.
No associations
LandOfFree
A 2 THz Heterodyne Array Receiver for SOFIA does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with A 2 THz Heterodyne Array Receiver for SOFIA, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and A 2 THz Heterodyne Array Receiver for SOFIA will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1615627