Physics
Scientific paper
Nov 2002
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2002mfpt....2..143c&link_type=abstract
Sixth Microgravity Fluid Physics and Transport Phenomena Conference: Exposition Topical Areas 1-6, vol. 2, p. 143-137
Physics
Microgravity, Impact Tests, Low Speed, Projectiles, C-135 Aircraft, High Speed Cameras, Regolith, Mirrors, Targets
Scientific paper
Low velocity collisions (v less than 100 m/s) occur in a number of astrophysical contexts, including planetary rings, protoplanetary disks, the Kuiper belt of comets, and in secondary cratering events on asteroids and planetary satellites. In most of these situations the surface gravity of the target is less than a few per cent of 1 g. Asteroids and planetary satellites are observed to have a regolith consisting of loose, unconsolidated material. Planetary ring particles likely are also coated with dust based on observations of dust within ring systems. The formation of planetesimals in protoplanetary disks begins with the accretion of dust particles. The response of the surface dust layer to collisions in the near absence of gravity is necessary for understanding the evolution of these systems. The Collisions Into Dust Experiment (COLLIDE) performs six impact experiments into simulated regolith in microgravity conditions on the space shuttle. The parameter space to be explored is quite large, including effects such as impactor mass and velocity, impact angle, target porosity, size distribution, and particle shape. We have developed an experiment, the Physics of Regolith Impacts in Microgravity Experiment (PRIME), that is analogous to COLLIDE that is optimized for flight on the NASA KC-135 reduced gravity aircraft. The KC-135 environment provides the advantage of more rapid turnover between experiments, allowing a broader range of parameters to be studied quickly, and more room for the experiment so that more impact experiments can be performed each flight. The acceleration environment of the KC-135 is not as stable and minimal as on the space shuttle, and this requires impact velocities to be higher than the minimum achievable with COLLIDE. The experiment consists of an evacuated PRIME Impact Chamber (PIC) with an aluminum base plate and acrylic sides and top. A target tray, launcher, and mirror mount to the base plate. The launcher may be positioned to allow for impacts at angles of 30, 45, 60, and 90 degrees with respect to the target surface. The target material is contained in a 10 cm by 10 cm by 2 cm tray with a rotating door that is opened via a mechanical feed-through on the base plate. A spring-loaded inner door provides uniform compression on the target material prior to operation of the experiment to keep the material from settling or locking up during vibrations prior to the experiment. Data is recorded with the NASA high speed video camera. Frame rates are selected according to the impact parameters. The direct camera view is orthogonal to the projectile line of motion, and the mirrors within the PIC provide a view normal to the target surface. The spring-loaded launchers allow for projectile speeds between 10 cm/s and 500 cm/s with a variety of impactor sizes and densities. On each flight 8 PICs will be used, each one with a different set of impact parameters. Additional information is included in the original extended abstract.
Colwell Joshua E.
Lemos Andreas R.
Sture Stein
No associations
LandOfFree
Microgravity Impact Experiments: The Prime Campaign on the NASA KC-135 does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Microgravity Impact Experiments: The Prime Campaign on the NASA KC-135, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Microgravity Impact Experiments: The Prime Campaign on the NASA KC-135 will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-950493