Design of the science-fold mirrors for the Gemini telescopes

Details Design of the science-fold mirrors for the Gemini telescopes Design of the science-fold mirrors for the Gemini telescopes

Jul 2000

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2000spie.4003..436p&link_type=abstract

Proc. SPIE Vol. 4003, p. 436-442, Optical Design, Materials, Fabrication, and Maintenance, Philippe Dierickx; Ed.

Physics

Optics

Scientific paper

As a part of the Acquisition and Guidance Unit for the Gemini project a light-weight, 50 cm flat mirror has been designed at the Fraunhofer Institute for Applied Optics and Precision Mechanics in Jena as a subcontractor of the Carl Zeiss Jena company. A light-weight design of the mirror and its mount was essential since the total mass of the whole assembly including the positioning system was limited to 50 kg while interferometric quality of the mirror surface was required for arbitrary orientation. The overall surface error was below 54 nm r.m.s. while 27 nm was achieved in the central part. The mirror was fabricated from low-expansion glass ceramics to avoid thermally induced deformations. By milling pockets into its rear surface the mass of the mirror was reduced by 70%. The mirror is mounted cinematically via six solid-state hinges to three steel levers. The levers are connected to the mount frame at their centers via ball-and- sphere joints. This arrangement determines the position of the mirror uniquely while it allows for the thermal expansion of the mount frame. The position of the mirror as well as its tilt around an axis perpendicular to the optical one may be controlled a precision of 20 micrometers and 3 arcsec, respectively. The tilt axis is driven directly by two high- torque motors. To avoid an excessive power consumption of the motors the torque of the mirror head to be compensated for by a counterweight mechanism. The mirror may be deployed into the optical path using spindle driven linear rails.

Affiliated with

Also associated with

No associations

Rating

Design of the science-fold mirrors for the Gemini telescopes does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Design of the science-fold mirrors for the Gemini telescopes, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Design of the science-fold mirrors for the Gemini telescopes will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1480581