Physics
Scientific paper
Oct 1993
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1993spie.1946..334h&link_type=abstract
Proc. SPIE Vol. 1946, p. 334-340, Infrared Detectors and Instrumentation, Albert M. Fowler; Ed.
Physics
36
Scientific paper
SpectroCam-10 is a 10 micrometers spectrograph and camera built at Cornell University as a facility instrument for the 200 inch Hale telescope. The instrument is optimized for operation from (lambda) equals 8 to 13 micrometers in three modes: a medium-resolution spectrography (R equals (lambda) /(Delta) (lambda) approximately equals 2000), a low-resolution spectrography (R approximately equals 100), and a camera with diffraction limited (0.5 arcsec) spatial resolution. An optical flat and two reflection gratings mounted on a cryogenic rotating mechanism allow rapid switching between modes. The detector is a Rockwell 128 X 128 Si:As Back Illuminated Blocked Impurity Band array. We discuss the design and operation of the instrument, and present some scientific results from our early observing runs at Palomar.
Gull George E.
Hayward Thomas L.
Houck James R.
Miles John E.
Schoenwald Justin
No associations
LandOfFree
SpectroCam-10: a 10-um spectrograph/camera for the Hale Telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with SpectroCam-10: a 10-um spectrograph/camera for the Hale Telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and SpectroCam-10: a 10-um spectrograph/camera for the Hale Telescope will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1330557