Computer Science
Scientific paper
Jul 1989
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1989esgp.nasa...65l&link_type=abstract
In NASA, Langley Research Center, Earth Science Geostationary Platform Technology p 65-68 (SEE N90-19249 12-15)
Computer Science
Antenna Design, Electromagnetism, Geosynchronous Orbits, Remote Sensing, Spacecraft Antennas, Synchronous Platforms, Electromagnetic Radiation, Large Space Structures, Millimeter Waves, Radio Telescopes, Reflector Antennas, Solar Flux, Surface Distortion, Temperature Gradients, Universe
Scientific paper
It is appropriate to note that 1988 marks the 100th anniversary of the birth of the reflector antenna. It was in 1888 that Heinrich Hertz constructed the first one, a parabolic cylinder made of sheet zinc bent to shape and supported by a wooden frame. Hertz demonstrated the existence of the electromagnetic waves that had been predicted theoretically by James Clerk Maxwell some 22 years earlier. In the 100 years since Hertz's pioneering work the field of electromagnetics has grown explosively: one of the technologies is that of remote sensing of planet Earth by means of electromagnetic waves, using both passive and active sensors located on an Earth Science Geostationary Platform (ESEP). For these purposes some exquisitely sensitive instruments were developed, capable of reaching to the fringes of the known universe, and relying on large reflector antennas to collect the minute signals and direct them to appropriate receiving devices. These antennas are electrically large, with diameters of 3000 to 10,000 wavelengths and with gains approaching 80 to 90 dB. Some of the reflector antennas proposed for ESGP are also electrically large. For example, at 220 GHz a 4-meter reflector is nearly 3000 wavelengths in diameter, and is electrically quite comparable with a number of the millimeter wave radiotelescopes that are being built around the world. Its surface must meet stringent requirements on rms smoothness, and ability to resist deformation. Here, however, the environmental forces at work are different. There are no varying forces due to wind and gravity, but inertial forces due to mechanical scanning must be reckoned with. With this form of beam scanning, minimizing momentum transfer to the space platform is a problem that demands an answer. Finally, reflector surface distortion due to thermal gradients caused by the solar flux probably represents the most challenging problem to be solved if these Large Space Antennas are to achieve the gain and resolution required of them.
No associations
LandOfFree
Large space antenna concepts for ESGP does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Large space antenna concepts for ESGP, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Large space antenna concepts for ESGP will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1704327