Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST

Details Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST

Jul 2006

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006spie.6269e.101z&link_type=abstract

Ground-based and Airborne Instrumentation for Astronomy. Edited by McLean, Ian S.; Iye, Masanori. Proceedings of the SPIE, Volu

Astronomy and Astrophysics

Astronomy

Scientific paper

This paper constructed two protecting methods of diminishing the collision during the opposite movement of the adjoining fiber unit in the LAMOST Positioning System. Auto-positioning mode is applied to every fiber positioning unit of LAMOST Positioning System. The observing region is a circular region with the diameter of 33 mm. To ensure the whole focal plane is covered by the observing region of 4000 fiber units, there must be superposition of observing region of each adjoining fiber units, which induced the collision of adjoining fiber holder in the movement process and resulted in the failing of orientation and mangling of structure. The mode of avoiding the collision comprises two methods. One is hard protected mode, according to this method sensors are installed at each fiber positioning unit, then the motion of the fiber units will be stopped immediately when the adjoining fiber units close to a dangerous distance. The other is soft protected mode, which deliberates every situation of software from the observation programming to the motion path designing for avoiding the collision. This paper expounds the designing and achievement of these two methods mentioned formally.

Affiliated with

Also associated with

No associations

Rating

Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Preliminary design of the collision avoidance device on the fiber positioning units of LAMOST will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1624175