Wideband digital filter using FPGAs

Astronomy and Astrophysics – Astronomy

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

1

Scientific paper

A digital filter being developed by the National Radio Astronomy Observatory (NRAO) for the Atacama Large Millimeter Array (ALMA) is presented here. The filter is designed using field programmable gate array (FPGA) integrated circuits and has an equivalent clock rate of 4 GHz. The ALMA radio astronomy array being developed by the NRAO in cooperation with several European scientific agencies will consist of up to 64 twelve-meter diameter antennas to be used for observing astronomical sources at millimeter and submillimeter wavelengths. This instrument is to observe with bandwidths up to 16 GHz per antenna in eight unbroken RF bands of 2 GHz each. Bandwidth-resolution trade-offs are done in ALMA by providing each of the eight 4-Gsample/s digitizers per antenna with a programmable Finite Impulse Response (FIR) digital filter. The filter can be selected to perform 1/1, 1/2, 1/4, . . ., 1/64 band filtering and sample decimation. In the 1/2 band mode, the filter has the equivalent of 128 tap weight multiplications. Tap weights increase by factors of two to the limit of 2048 tap weights when the filter is programmed to be a 1/32 band low-pass or high-pass filter. The filter is designed to process the output of a four-bit digitizer. The filter utilizes RAM look-up tables for tap weight multiplications. The output of the tap weight multiplications drive an adder tree which has 10-bit precision in the early stages and 7-bit precision in latter stages. Output quantizing of the adder tree output is done in look-up table RAM to 2- bit, 4-level precision. The filter is implemented on a 280-mm, 6-U, Euro card using FPGA ICs running with a system clock rate of 125 MHz.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Wideband digital filter using FPGAs does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Wideband digital filter using FPGAs, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Wideband digital filter using FPGAs will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1482557

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.