Computer Science – Performance
Scientific paper
Dec 2004
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004aas...205.4804a&link_type=abstract
American Astronomical Society Meeting 205, #48.04; Bulletin of the American Astronomical Society, Vol. 36, p.1416
Computer Science
Performance
Scientific paper
In the current investigation, details on the construction and performance of a vacuum-flexed (i.e., figured) 51 cm (20-inch) mirror, with a fast f/4 focal ratio, are presented. A vacuum has the chief advantage of being able to pull with a uniform or isotropic stress across a large surface area, which will naturally form a parabolic surface. The essence of the idea is to grind and polish a spherical mirror and then warp or flex it into a near perfect paraboloid, thus avoiding tedious figuring altogether. To date, telescope makers around the globe have experimented with small flexed mirrors with considerable success. In these instances, mirrors have been flexed by exerting tension on a bolt or sponge-pad adhered to the back of the mirror.
The prototype mirror consists of two 51 cm disks of plate glass -- each slumped to an f/4 focal ratio. The front-plate (19 mm in thickness) is separated from the back-plate (13 mm in thickness) back a flexible 9.5 mm air filled gasket. Although the rubber gasket makes a fairly good vacuum seal, silicon cement was placed about the outer edge in order to produce a perfectly tight seal. A vacuum of 8 kPa on the back of the mirror resulted in approximately 164 kilograms of negative pressure, which is required to flex the mirror into the required paraboloid. Ronchi test show a nice smooth paraboloid free from astigmatism while foucault zonal measurements display a figure better than 1/20 wave. Preliminary star testing show promising results as well. Vacuum-flexed mirrors may have benefits for both amateur and professional telescope makers alike. A US patent is pending on the aforementioned design.
No associations
LandOfFree
Vacuum-Flex Figuring of Primary Telescope Mirrors does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Vacuum-Flex Figuring of Primary Telescope Mirrors, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Vacuum-Flex Figuring of Primary Telescope Mirrors will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1638078