Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings

Astronomy and Astrophysics – Astrophysics – General Relativity and Quantum Cosmology

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Submitted to LSC (internal) review Sept. 20, 2001. To be submitted to Phys. Lett. A

Scientific paper

10.1088/0264-9381/19/5/305

We report on thermal noise from the internal friction of dielectric coatings made from alternating layers of Ta2O5 and SiO2 deposited on fused silica substrates. We present calculations of the thermal noise in gravitational wave interferometers due to optical coatings, when the material properties of the coating are different from those of the substrate and the mechanical loss angle in the coating is anisotropic. The loss angle in the coatings for strains parallel to the substrate surface was determined from ringdown experiments. We measured the mechanical quality factor of three fused silica samples with coatings deposited on them. The loss angle of the coating material for strains parallel to the coated surface was found to be (4.2 +- 0.3)*10^(-4) for coatings deposited on commercially polished slides and (1.0 +- 0.3)*10^{-4} for a coating deposited on a superpolished disk. Using these numbers, we estimate the effect of coatings on thermal noise in the initial LIGO and advanced LIGO interferometers. We also find that the corresponding prediction for thermal noise in the 40 m LIGO prototype at Caltech is consistent with the noise data. These results are complemented by results for a different type of coating, presented in a companion paper.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Thermal noise in interferometric gravitational wave detectors due to dielectric optical coatings will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-657801

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.