The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning

Details The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning

Jul 2006

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006spie.6269e..72s&link_type=abstract

Ground-based and Airborne Instrumentation for Astronomy. Edited by McLean, Ian S.; Iye, Masanori. Proceedings of the SPIE, Volu

Astronomy and Astrophysics

Astronomy

2

Scientific paper

The Prime Focus Imaging Spectrograph (PFIS) is a first light instrument for the Southern African Large Telescope (SALT). PFIS is a versatile instrument designed to operate in a number of scientific modes by utilizing volume phase holographic gratings, Fabry-Perot etalons, and polarimetric optics, which are manipulated in and out of the beam using various placement mechanisms. The instrument is mounted at the prime focus 15m above the primary mirror and tilted at 37°. This remote placement and the need for 240° of rotation about the optical axis raises important design issues with mass, flexure and access. The instrument structure provides the interface to the telescope Prime Focus Instrument Platform (PFIP) as well as support points for all the optics, mechanisms and electrical equipment. The structure is a welded open truss of hollow, square-section Invar beams. The open truss provides the highest stiffness to weight ratio and minimizes the effect of wind loading, while the use of Invar negates the effects of thermal expansion. It has been designed using finite element analysis in conjunction with an optical tolerance analysis of the optics nodes to minimize effective image motion under the varying gravity load. The fundamentals of the design of the structure to minimize the flexure and its effect on image motion, the motivation for using the open Invar truss structure, and the design of the remotely operated mechanisms are discussed. In 2005 PFIS was installed and commissioned on SALT in South Africa. Included in this text are some of the results and experiences of taking PFIS into operation.

Affiliated with

Also associated with

No associations

Rating

The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and The prime focus imaging spectrograph for the Southern African Large Telescope: structural and mechanical design and commissioning will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1624099