Statistics – Applications
Scientific paper
Dec 2009
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2009agufm.p51d1153j&link_type=abstract
American Geophysical Union, Fall Meeting 2009, abstract #P51D-1153
Statistics
Applications
[0343] Atmospheric Composition And Structure / Planetary Atmospheres, [5405] Planetary Sciences: Solid Surface Planets / Atmospheres, [6225] Planetary Sciences: Solar System Objects / Mars
Scientific paper
The Mars Global Reference Atmospheric Model (Mars-GRAM) is an engineering-level atmospheric model widely used for diverse mission applications. Mars-GRAM’s perturbation modeling capability is commonly used, in a Monte-Carlo mode, to perform high fidelity engineering end-to-end simulations for entry, descent, and landing (EDL). It has been discovered during the Mars Science Laboratory (MSL) site selection process that Mars-GRAM when used for sensitivity studies for MapYear=0 and large optical depth values such as tau=3 is less than realistic. A comparison study between Mars atmospheric density estimates from Mars-GRAM and measurements by Mars Global Surveyor (MGS) has been undertaken for locations of varying latitudes, Ls, and LTST on Mars. The preliminary results from this study have validated the Thermal Emission Spectrometer (TES) limb data. From the surface to 80 km altitude, Mars-GRAM is based on the NASA Ames Mars General Circulation Model (MGCM). MGCM results that were used for Mars-GRAM with MapYear=0 were from a MGCM run with a fixed value of tau=3 for the entire year at all locations. Unrealistic energy absorption by uniform atmospheric dust leads to an unrealistic thermal energy balance on the polar caps. The outcome is an inaccurate cycle of condensation/sublimation of the polar caps and, as a consequence, an inaccurate cycle of total atmospheric mass and global-average surface pressure. Under an assumption of unchanged temperature profile and hydrostatic equilibrium, a given percentage change in surface pressure would produce a corresponding percentage change in density at all altitudes. Consequently, the final result of a change in surface pressure is an imprecise atmospheric density at all altitudes. To solve this pressure-density problem, a density factor value was determined for tau=.3, 1 and 3 that will adjust the input values of MGCM MapYear 0 pressure and density to achieve a better match of Mars-GRAM MapYear 0 with MapYears 1 and 2 MGCM output at comparable dust loading. Currently, these density factors are fixed values for all latitudes and Ls. Results will be presented of the work underway to derive better multipliers by including possible variation with latitude and/or Ls. This is achieved by comparison of Mars-GRAM MapYear=0 output with TES limb data. The addition of these density factors to Mars-GRAM will improve the results of the sensitivity studies done for large optical depths. Answers may also be provided to the issues raised in a recent study by Desai(2008). Desai has shown that the actual landing sites of Mars Pathfinder, the Mars Exploration Rovers and the Phoenix Mars Lander have been further downrange than predicted by models prior to landing. Desai’s reconstruction of their entries into the Martian atmosphere showed that the models consistently predicted higher densities than those found upon EDL. The solution of this problem would be important to the Mars Program since future exploration of Mars by landers and rovers will require more accurate landing capabilities, especially for the proposed Mars Sample Return mission.
Badger A. M.
Justh H. L.
Justus C. G.
No associations
LandOfFree
Strategies to Improve the Accuracy of Mars-GRAM Sensitivity Studies at Large Optical Depths does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Strategies to Improve the Accuracy of Mars-GRAM Sensitivity Studies at Large Optical Depths, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Strategies to Improve the Accuracy of Mars-GRAM Sensitivity Studies at Large Optical Depths will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1773441