Solid state detector arrays for terahertz applications

Statistics – Applications

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Scientific paper

From a commercial point of view the terahertz region from 100GHz to 10THz remains largely unexplored. The main reason for this has been the lack of readily available, rugged solid state detection technology that has sufficient sensitivity for applications such as passive imaging. This is particularly true when arrays of such detectors are considered. Until recently the main technology driver has been ground based Radio Astronomy. Here the drive for absolute noise performance has focused effort towards the development of cryogenically cooled detection techniques, primarily utilising liquid Helium cooled superconducting devices. Commercially, the use of such cryogens will usually rule out most potential high volume applications largely for practical reasons such as running cost, convenience and health and safety issues. In order to kick-start the commercial exploitation of the terahertz region an alternative detection technology is required. The detector technology reported here has its origins in remote sensing applications where the low noise performance requirements are not quite so stringent. Here, reliability, low power operation, low mass and volume are combined with rugged design. These so happen to be the main prerequisites for any commercial solution. For space borne technology, however, cost is not usually an issue and correspondingly until the application of manufacturing methodology the technology has been prohibitively expensive to adopt. This paper reports on the current state of the art in solid state detector array technology aimed at exploiting commercial applications in the terahertz region. An overview of the technology background is provided combined with a forward look outlining the areas where rapid technology advancement can be expected. The utilisation of this detector technology in the application of real time passive terahertz imaging will be shown.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Solid state detector arrays for terahertz applications does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Solid state detector arrays for terahertz applications, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Solid state detector arrays for terahertz applications will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1329561

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.