Mathematics – Logic
Scientific paper
May 1995
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1995spie.2474..151f&link_type=abstract
Proc. SPIE Vol. 2474, p. 151-162, Smart Focal Plane Arrays and Focal Plane Array Testing, Marc Wigdor; Mark A. Massie; Eds.
Mathematics
Logic
Scientific paper
The Arnold Engineering Development Center (AEDC) Scene Generation Test Capability (SGTC) program has completed the development of a laser based Direct Write Scene Generation (DWSG) facility that provides dynamic mission simulation testing for infrared (IR) Focal Plane Array (FPAs) and their associated signal processing electronics. The AEDC DWSG Focal Plane Array Test Capability includes lasers operating at 0.514, 1.06, 5.4, or 10.6 micrometers , and Acousto-Optic Deflectors (AODs) which modulate the laser beam position and amplitude. Complex Radio Frequency (RF) electronics control each AOD by providing multi-frequency inputs. These inputs produce a highly accurate and independent multi-beam deflection, or `rake', that is swept across the FPA sensor under test. Each RF amplitude input to an AOD translates into an accurate and independent beam intensity in the rake. Issues such as scene fidelity, sensor frame rates, scenario length, and real-time laser beam position adjustments require RF control electronics that employ the use of advanced analog and digital signal processing techniques and designs. By implementing flexible system architectures in the electronics, the overall capability of the DWSG to adapt to emerging test requirements is greatly enhanced. Presented in this paper is an overview of the signal processing methodology and designs required to handle the DWSG requirement. Further, electronic design techniques that enabled the system to be implemented within program cost constraints will also be presented. These electronic designs include a broad range of disciplines including digital signal processing hardware and software, programmable logic implementations, and advanced techniques for high fidelity RF synthesis, switching, and amplitude control. Techniques for validating electronic performance will also be presented along with data acquired using those techniques.
Fugerer R. H.
Hervig D. J.
Holt L. L.
Lowry Heard S.
No associations
LandOfFree
Signal processing hardware and software applied to the development of a real-time infrared mission simulation test capability does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Signal processing hardware and software applied to the development of a real-time infrared mission simulation test capability, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Signal processing hardware and software applied to the development of a real-time infrared mission simulation test capability will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1549936