Radiation Effects in Refractory Alloys

Details Radiation Effects in Refractory Alloys Radiation Effects in Refractory Alloys

Feb 2004

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004aipc..699..733z&link_type=abstract

SPACE TECHNOLOGY AND APPLICATIONS INTERNAT.FORUM-STAIF 2004: Conf.on Thermophys.in Microgravity; Commercial/Civil Next Gen.Space

Statistics

Applications

2

Spaceborne And Space Research Instruments, Apparatus, And Components, Protection Systems, Safety, Radiation Monitoring, Accidents, And Dismantling, Theory, Design, And Computerized Simulation, Metals And Alloys

Scientific paper

In order to achieve the required low reactor mass per unit electrical power for space reactors, refractory alloys are essential due to their high operating temperature capability that in turn enables high thermal conversion efficiencies. One of the key issues associated with refractory alloys is their performance in a neutron irradiation environment. The available radiation effects data are reviewed for alloys based on Mo, W, Re, Nb and Ta. The largest database is associated with Mo alloys, whereas Re, W and Ta alloys have the least available information. Particular attention is focused on Nb-1Zr, which is a proposed cladding and structural material for the reactor in the Jupiter Icy Moons Orbiter (JIMO) project. All of the refractory alloys exhibit qualitatively similar temperature-dependent behavior. At low temperatures up to ~0.3TM, where TM is the melting temperature, the dominant effect of radiation is to produce pronounced radiation hardening and concomitant loss of ductility. The radiation hardening also causes a dramatic decrease in the fracture toughness of the refractory alloys. These low temperature radiation effects occur at relatively low damage levels of ~0.1 displacement per atom, dpa (~2×1024 n/m2, E>0.1 MeV). As a consequence, operation at low temperatures in the presence of neutron irradiation must be avoided for all refractory alloys. At intermediate temperatures (0.3 to 0.6 TM), void swelling and irradiation creep are the dominant effects of irradiation. The amount of volumetric swelling associated with void formation in refractory alloys is generally within engineering design limits (<5%) even for high neutron exposures (>>10 dpa). Very little experimental data exist on irradiation creep of refractory alloys, but data for other body centered cubic alloys suggest that the irradiation creep will produce negligible deformation for near-term space reactor applications.

Affiliated with

Also associated with

No associations

Rating

Radiation Effects in Refractory Alloys does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Radiation Effects in Refractory Alloys, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Radiation Effects in Refractory Alloys will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1601437