PtSi camera: performance model validation

Details PtSi camera: performance model validation PtSi camera: performance model validation

Dec 1991

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1991spie.1540..729m&link_type=abstract

Proc. SPIE Vol. 1540, p. 729-737, Infrared Technology XVII, Bjorn F. Andresen; Marija S. Scholl; Irving J. Spiro; Eds.

Computer Science

Performance

Scientific paper

A set of field tests was performed to demonstrate the use of a PtSi camera for airborne applications. The test-data was used to verify the applicability of Tamam's performance model. The sensor was integrated into a Tamam stabilized payload and mounted on a Bell 206 helicopter. Over 30 hours of recorded data was collected from different backgrounds and scenarios. The information analyzed so far was matched with computed results. These results, generated by our 'Detector' program and compared to the test results show good correlation, and thus validate the 'Detector' analysis program.

Affiliated with

Also associated with

No associations

Rating

PtSi camera: performance model validation does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with PtSi camera: performance model validation, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and PtSi camera: performance model validation will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1268453