Computer Science – Sound
Scientific paper
Sep 1995
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1995spie.2536..386m&link_type=abstract
Proc. SPIE Vol. 2536, p. 386-396, Optical Manufacturing and Testing, Victor J. Doherty; H. Philip Stahl; Eds.
Computer Science
Sound
Scientific paper
In this report are considered the basic problems which relate to developemnt, manufacture, experimental trying out, and usage of primary mirrors (PM) of the large space telescopes intended to perform distant sounding of the Earth. Attention is concentrated on development of weight-reduced passive mirrors which ensure more reliable operation of the telescope as a whole. In the report we expressed the opinion that it is quite possible to manufacture a passive weight-reduced PM if its diameter is equal approximately to 3 m. Materials which may be used for the manufacturing of PM are beryllium and silicon carbide, physical and mechanical parameters of which are the most preferable ones. But it should be taken into consideration that this is the glass ceramic of CO115M brand which has been mastered by the industry of Russia in the greatest extent. It was confirmed that parameters of this material remain unchanged during a long period of time. Constructions of the PM, made of glass ceramic, as well as constructions of holders intended to fix the mirror, are presented in this report. A holder is used first of all to prevent lowering of a PM surface quality after a mirror has been removed from a machine and fixed in a primary mirror assembly (PMA). At present two-layer construction of a PM is preferable. This construction consists of thick base including weight reduction structure, which is in a radius which is optimum from the standpoint of deformation of a mirror operating surface. In the process of manufacture a mirror is deprived of its weight with the use of special pneumatic off-loading elements. PMA is erected in vertical plane by means of using an interferometric inspection system. In the end of this report we expressed the views on an approach to engineering of a PM by taking into account potentialities both of space ships and of carrier rockets.
Malamed Evgeny R.
Sokolsky M. N.
No associations
LandOfFree
Primary mirror assemblies for large space telescopes does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Primary mirror assemblies for large space telescopes, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Primary mirror assemblies for large space telescopes will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-990534