Astronomy and Astrophysics – Astronomy
Scientific paper
Jul 2010
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2010spie.7741e..18c&link_type=abstract
Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V. Edited by Holland, Wayne S.; Zmuidzin
Astronomy and Astrophysics
Astronomy
Scientific paper
Detectors employing superconducting microwave kinetic inductance detectors (MKIDs) can be read out by measuring changes in either the resonator frequency or dissipation. We will discuss the pros and cons of both methods, in particular, the readout method strategies being explored for the Multiwavelength Sub/millimeter Inductance Camera (MUSIC) to be commissioned at the CSO in 2010. As predicted theoretically and observed experimentally, the frequency responsivity is larger than the dissipation responsivity, by a factor of 2-4 under typical conditions. In the absence of any other noise contributions, it should be easier to overcome amplifier noise by simply using frequency readout. The resonators, however, exhibit excess frequency noise which has been ascribed to a surface distribution of two-level fluctuators sensitive to specific device geometries and fabrication techniques. Impressive dark noise performance has been achieved using modified resonator geometries employing interdigitated capacitors (IDCs). To date, our noise measurement and modeling efforts have assumed an onresonance readout, with the carrier power set well below the nonlinear regime. Several experimental indicators suggested to us that the optimal readout technique may in fact require a higher readout power, with the carrier tuned somewhat off resonance, and that a careful systematic study of the optimal readout conditions was needed. We will present the results of such a study, and discuss the optimum readout conditions as well as the performance that can be achieved relative to BLIP.
Czakon Nicole G.
Day Peter K.
Downes Thomas Patrick
Duan Ran P.
Gao Jiansong
No associations
LandOfFree
Optimization of MKID noise performance via readout technique for astronomical applications does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Optimization of MKID noise performance via readout technique for astronomical applications, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Optimization of MKID noise performance via readout technique for astronomical applications will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1388474