Optimal method for fabrication of gradient dichroic mirrors without mask

Details Optimal method for fabrication of gradient dichroic mirrors without mask Optimal method for fabrication of gradient dichroic mirrors without mask

May 1999

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1999spie.3634...44t&link_type=abstract

Proc. SPIE Vol. 3634, p. 44-51, Projection Displays V, Ming H. Wu; Ed.

Computer Science

Performance

Scientific paper

Gradient dichroic mirrors consisting 25 alternating layers of TiO2 and SiO2 were prepared by reactive electron beam deposition at a glass-substrate temperature of 300 degrees C in a home made planetary planar coating system without mask. Samples with the various tilt angles from the rotating axis were hanged on the edge of four specially designed hollow planets. The thickness variation for a single layer SiO2 over a planet of 16 cm diameter at the height of 60 cm was less than 3 percent. This coating system was very suitable for the coating of gradient dichroic mirrors with large area showing the consistent color performance with various incident angles across the mirror surface.

Affiliated with

Also associated with

No associations

Rating

Optimal method for fabrication of gradient dichroic mirrors without mask does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Optimal method for fabrication of gradient dichroic mirrors without mask, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Optimal method for fabrication of gradient dichroic mirrors without mask will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1194213