Astronomy and Astrophysics – Astrophysics
Scientific paper
Oct 2004
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2004spie.5487.1092e&link_type=abstract
Optical, Infrared, and Millimeter Space Telescopes. Edited by Mather, John C. Proceedings of the SPIE, Volume 5487, pp. 1092-
Astronomy and Astrophysics
Astrophysics
2
Scientific paper
We report the surface structure and roughness of the mirrors made of carbon fiber reinforced silicon carbide (C/SiC) composite improved for the SPICA (Space Infrared telescope for Cosmology and Astrophysics) mission. The improved C/SiC is a candidate of material for the SPICA light weight mirrors because of its superior properties: high toughness, high stiffness, small thermal deformation, feasibility to make large single dish mirror, low cost, and short term for production. The surface of the bare C/SiC composite consists of carbon fiber, silicon carbide and silicon, each of which has different hardness, so it is difficult to polish this surface smoothly. Our improved polishing technique achieved the surface roughness of better than 20nm RMS for the C/SiC composite flat mirror, which satisfies the requirement of the SPICA mission. For curved bare surface of the C/SiC mirror, the roughness is larger than 30 nm and now under improving. The Change of Bidirectional reflectance distribution function (BRDF) of the bare C/SiC composite at cryogenic temperature was measured with 632.8nm lasar. No significant difference was found between the BRDFs at 95K and that at room temperature. In order to improve surface roughness further, we are planning to apply the SiSiC slurry coating on the surface of the improved C/SiC composite. This combination can realize the surface roughness well enough to be applied even for optical telescopes.
Enya Keigo
Kaneda Hidehiro
Kataza Hirokazu
Nakagawa Takao
Onaka Takashi
No associations
LandOfFree
Optical quality of C/SiC composite for the SPICA telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Optical quality of C/SiC composite for the SPICA telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Optical quality of C/SiC composite for the SPICA telescope will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1807597