Optical communications and a comparison of optical technologies for a high data rate return link from Mars

Computer Science – Performance

Scientific paper

Rate now

  [ 0.00 ] – not rated yet Voters 0   Comments 0

Details

Bit Error Rate, Data Links, Heterodyning, Homodyne Reception, Optical Communication, Phase Modulation, Rates (Per Time), Receivers, Signal To Noise Ratios, Apertures, Carbon Dioxide Lasers, Mean Square Values, Root-Mean-Square Errors, Semiconductor Lasers, Telescopes

Scientific paper

The important principles of direct- and heterodyne-detection optical free-space communications are reviewed. Signal-to-noise-ratio (SNR) and bit-error-rate (BER) expressions are derived for both the direct-detection and heterodyne-detection optical receivers. For the heterodyne system, performance degradation resulting from received-signal and local oscillator-beam misalignment and laser phase noise is analyzed. Determination of interfering background power from local and extended background sources is discussed. The BER performance of direct- and heterodyne-detection optical links in the presence of Rayleigh-distributed random pointing and tracking errors is described. Finally, several optical systems employing Nd:YAG, GaAs, and CO2 laser sources are evaluated and compared to assess their feasibility in providing high-data-rate (10- to 1000-Mbps) Mars-to-Earth communications. It is shown that the root mean square (rms) pointing and tracking accuracy is a critical factor in defining the system transmitting laser-power requirements and telescope size and that, for a given rms error, there is an optimum telescope aperture size that minimizes the required power. The results of the analysis conducted indicate that, barring the achievement of extremely small rms pointing and tracking errors (less than 0.2 microrad), the two most promising types of optical systems are those that use an Nd:YAG laser (lambda = 1.064 microns) and high-order pulse position modulator (PPM) and direct detection, and those that use a CO2 laser (lambda = 10.6 microns) and phase shifting keying homodyne modulation and coherent detection. For example, for a PPM order of M = 64 and an rms pointing accuracy of 0.4 microrad, an Nd:YAG system can be used to implement a 100-Mbps Mars link with a 40-cm transmitting telescope, a 20-W laser, and a 10-m receiving photon bucket. Under the same conditions, a CO2 system would require 3-m transmitting and receiving telescopes and a 32-W laser to implement such a link. Other types of optical systems, such as a semiconductor laser systems, are impractical in the presence of large rms pointing errors because of the high power requirements of the 100-Mbps Mars link, even when optimal-size telescopes are used.

No associations

LandOfFree

Say what you really think

Search LandOfFree.com for scientists and scientific papers. Rate them and share your experience with other people.

Rating

Optical communications and a comparison of optical technologies for a high data rate return link from Mars does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Optical communications and a comparison of optical technologies for a high data rate return link from Mars, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Optical communications and a comparison of optical technologies for a high data rate return link from Mars will most certainly appreciate the feedback.

Rate now

     

Profile ID: LFWR-SCP-O-1266181

  Search
All data on this website is collected from public sources. Our data reflects the most accurate information available at the time of publication.