NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope

Details NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope

Jul 2010

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2010spie.7738e..30h&link_type=abstract

Modeling, Systems Engineering, and Project Management for Astronomy IV. Edited by Angeli, George Z.; Dierickx, Philippe. Proce

Astronomy and Astrophysics

Astronomy

Scientific paper

The Nuclear Spectroscopic Telescope Array (NuSTAR) is a NASA Small Explorer mission that will make the first sensitive images of the sky in the high energy X-ray band (6 - 80 keV). The NuSTAR observatory consists of two co-aligned grazing incidence hard X-ray telescopes with a ~10 meter focal length, achieved by the on-orbit extension of a deployable mast. A principal science objective of the mission is to locate previously unknown high-energy X-ray sources to an accuracy of 10 arcseconds (3-sigma), sufficient to uniquely identify counterparts at other wavelengths. In order to achieve this, a star tracker and laser metrology system are an integral part of the instrument; in conjunction, they will determine the orientation of the optics bench in celestial coordinates and also measure the flexures in the deployable mast as it responds to the varying on-orbit thermal environment, as well as aerodynamic and control torques. The architecture of the NuSTAR system for solving the attitude and aspect problems differs from that of previous X-ray telescopes, which did not require ex post facto reconstruction of the instantaneous observatory alignment on-orbit. In this paper we describe the NuSTAR instrument metrology system architecture and implementation, focusing on the systems engineering challenges associated with validating the instantaneous transformations between focal plane and celestial coordinates to within the required accuracy. We present a mathematical solution to photon source reconstruction, along with a detailed error budget that relates component errors to science performance. We also describe the architecture of the instrument simulation software being used to validate the end-to-end performance model.

Affiliated with

Also associated with

No associations

Rating

NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and NuSTAR: system engineering and modeling challenges in pointing reconstruction for a deployable x-ray telescope will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1384462