Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine

Details Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine

Jan 1999

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1999aipc..458.1507w&link_type=abstract

Space technology and applications international forum -1999. AIP Conference Proceedings, Volume 458, pp. 1507-1512 (1999).

Statistics

Applications

Propulsion Reactors

Scientific paper

The square-lattice honeycomb reactor is designed based on a cylindrical core that is determined to have critical diameter and length of 0.50 m and 0.50 c, respectively. A 0.10-cm thick radial graphite reflector, in addition to a 0.20-m thick axial graphite reflector are used to reduce neutron leakage from the reactor. The core is fueled with solid solution of 93% enriched (U, Zr, Nb)C, which is one of several ternary uranium carbides that are considered for this concept. The fuel is to be fabricated as 2 mm grooved (U, Zr, Nb)C wafers. The fuel wafers are used to form square-lattice honeycomb fuel assemblies, 0.10 m in length with 30% cross-sectional flow area. Five fuel assemblies are stacked up axially to form the reactor core. Based on the 30% void fraction, the width of the square flow channel is about 1.3 mm. The hydrogen propellant is passed through these flow channels and removes the heat from the reactor core. To perform nuclear design analysis, a series of neutron transport and diffusion codes are used. The preliminary results are obtained using a simple four-group cross-section model. To optimize the nuclear design, the fuel densities are varied for each assembly. Tantalum, hafnium and tungsten are considered and used as a replacement for niobium in fuel material to provide water submersion sub-criticality for the reactor. Axial and radial neutron flux and power density distributions are calculated for the core. Results of the neutronic analysis indicate that the core has a relatively fast spectrum. From the results of the thermal hydraulic analyses, eight axial temperature zones are chosen for the calculation of group average cross-sections. An iterative process is conducted to couple the neutronic calculations with the thermal hydraulics calculations. Results of the nuclear design analysis indicate that a compact core can be designed based on ternary uranium carbide square-lattice honeycomb fuel. This design provides a relatively high thrust to weight ratio.

Affiliated with

Also associated with

No associations

Rating

Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Nuclear design analysis of square-lattice honeycomb space nuclear rocket engine will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1189195