Modeling and performance of a polarization active imager at lambda=806 nm

Details Modeling and performance of a polarization active imager at lambda=806 nm Modeling and performance of a polarization active imager at lambda=806 nm

May 1999

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1999spie.3707..449b&link_type=abstract

Proc. SPIE Vol. 3707, p. 449-460, Laser Radar Technology and Applications IV, Gary W. Kamerman; Christian Werner; Eds.

Statistics

Applications

4

Scientific paper

We present the modeling and the performances of a Polarization Active Imager at (lambda) equals 806 nm. The device is operating in a monostatic configuration, using a semiconductor laser to illuminate the target and a telescope to create the image on a CCD matrix. Dual images (intensity and polarization degree) of different scenes are obtained by a new method (only 2 images acquisition) and analyzed, showing the experimental validation of this concept. The application of this active imager to the detection of target buried in the background (same reflectivity but different polarization degree) is proposed.

Affiliated with

Also associated with

No associations

Rating

Modeling and performance of a polarization active imager at lambda=806 nm does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Modeling and performance of a polarization active imager at lambda=806 nm, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Modeling and performance of a polarization active imager at lambda=806 nm will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1194426