Method of using pulse laser to calibrate transient surface temperature detectors

Details Method of using pulse laser to calibrate transient surface temperature detectors Method of using pulse laser to calibrate transient surface temperature detectors

Sep 1996

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1996spie.2894..187l&link_type=abstract

Proc. SPIE Vol. 2894, p. 187-190, Detectors, Focal Plane Arrays, and Applications, William G. Frederick; Junhong Su; Marc Wigdor

Statistics

Applications

Scientific paper

A dynamic calibration system for transient surface temperature detectors is introduced. In this system a pulse laser and a continuous laser are used as excitation sources. The static and dynamic calibrations have been carried out respectively with the use of the continuous CO(subscript 2) laser and Nd-glass pulse laser. Several quick response thermocouples have been tested on the system. The experimental results have shown that this calibration system can be used to calibrate transient surface temperature detectors with a time response on order of microseconds.

Affiliated with

Also associated with

No associations

Rating

Method of using pulse laser to calibrate transient surface temperature detectors does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Method of using pulse laser to calibrate transient surface temperature detectors, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Method of using pulse laser to calibrate transient surface temperature detectors will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-997751