Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces

Details Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces

Sep 2000

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2000phdt........18m&link_type=abstract

Thesis (PhD). UNIVERSITY OF WASHINGTON, Source DAI-B 61/03, p. 1449, Sep 2000, 253 pages.

Other

2

Scientific paper

After more than 200 years, the torsion balance/pendulum is still one of the most precise means for measuring weak, macroscopic-range forces. Historically, two primary measurement techniques have been developed for this instrument. In one, the signal is the equilibrium angular displacement of the pendulum resulting from the presence of an external torque. In the other, this torque is detected by the associated fractional change in the natural frequency of torsion oscillations. Both techniques have been refined to the point that some experiments are now limited by temporal variations in torsion fiber temperature, despite special efforts to insure temperature stability. We have devised and tested another torsion pendulum measurement technique for which the effect of fiber temperature variations is suppressed by more than four orders of magnitude. Our observable is the amplitude of the second harmonic of the pendulum motion. A data set of 10 runs, each approximately 3 days in duration, using a magnesium/beryllium composition-dipole pendulum yielded a variation in the second harmonic amplitude of 0.29 +/- 0.47 nanoradians which corresponds to a differential acceleration between the magnesium and beryllium of 2.5 +/- 4.0 × 10-12 cm/sec2. This new technique suggests that a continued improvement in the precision of these fundamental physics experiments may be realized with a moderately high Q, room-temperature apparatus.

Affiliated with

Also associated with

No associations

Rating

Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Measuring the second harmonic amplitude of an oscillating torsion pendulum to detect small forces will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-764598