MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier

Details MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier

2007-09-22

arxiv.org/abs/0709.3594v1

Nonlinear Sciences

Adaptation and Self-Organizing Systems

Scientific paper

The protection of any electrical installation is one of the most important considerations in the field of electrical engineering. The electrical installation should be protected against hazards such as overload current and short circuit current conditions. The protection devices studied in this paper are the Miniature Circuit Breaker (MCB) and the High Rupturing Capacity (HRC) Fuse. Using a new tool known as the 3-AND Convergence Classifier, it was observed that the MCB is the most reliable in terms of offering protection against the damage caused by overload currents and the destruction caused by short circuit currents.

Affiliated with

Also associated with

No associations

Rating

MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and MCBs versus Fuses in Low-Voltage Applications: Critical Analysis Using the 3-AND Convergence Classifier will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-544285