Other
Scientific paper
Jun 1992
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1992esasp.340...93b&link_type=abstract
In ESA, Frequency and Time Forum p 93-98 (SEE N93-24978 09-70)
Other
Gamma Rays, Irradiation, Q Factors, Quartz Crystals, Radiation Effects, Resonators, Dynamic Characteristics, Frequency Measurement, Infrared Inspection, Temperature Measurement
Scientific paper
The frequency and motional resistance characteristics versus temperature of SC (Stress Compensation) cut resonators were measured before, during, and after irradiation, in order to correlate the influence of the selected chemical impurities on their electrical behavior. The long term drifts were discussed and compared to the Al(3+) ion content. These measurements were performed on BVA (electrodeless quartz resonator) SC cut, which were manufactured using either synthetic (swept or unswept) or natural quartz crystals. The results obtained show that a link could be established between the gamma irradiation sensitivity and the aluminum content and hence, the large difference, on one hand, between natural and synthetic raw material and, on the other hand, between unswept and swept quartz crystals.
Berthaut A.
Boy J. J.
Thiebaud D.
Yamni K.
No associations
LandOfFree
Long term drift and gamma-irradiation effect does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Long term drift and gamma-irradiation effect, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Long term drift and gamma-irradiation effect will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1203652