Computer Science – Performance
Scientific paper
Jan 2006
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2006aipc..813..183p&link_type=abstract
SPACE TECH.& APPLIC.INT.FORUM-STAIF 2006: 10th Conf Thermophys Applic Microgravity; 23rd Symp Space Nucl Pwr & Propulsion; 4th C
Computer Science
Performance
Fiber-Optic Instruments, Spaceborne And Space Research Instruments, Apparatus, And Components
Scientific paper
In this paper, recent work on the performance of optical fiber, fiber optic sensors, and fiber optic connectors under the influence of a high-energy electron beam is presented. Electron beam irradiation is relevant for the Jupiter Icy Moons Orbiter (JIMO) mission due to the high electron radiation environment surrounding Jupiter. As an initial feasibility test, selected optical fiber components were exposed to dose levels relevant to the Jupiter environment. Three separate fiber types were used: one series consisted of pure silica core fiber, two other series consisted of different levels of Germania-doped fiber. Additionally, a series of fused silica Extrinsic Fabry-Perot Interferometer (EFPI)-based fiber optic sensors and two different types of fiber optic connectors were tested. Two types of fiber coatings were evaluated: acrylate and polyimide. All samples were exposed to three different dose levels: 2 MRad, 20 MRad, and 50 MRad. Optical loss measurements were made on the optical fiber spools as a function of wavelength between 750 and 1750nm at periodic intervals up to 75 hrs after exposure. Attenuation is minimal and wavelength-dependent. Fiber optic sensors were evaluated using a standard EFPI sensor readout and diagnostic system. Optical connectors and optical fiber coatings were visually inspected for degradation. Additionally, tensile testing and minimum bend radius testing was conducted on the fibers. Initial loss measurements indicate a low-level of induced optical attenuation in the fiber which recovers with time. The fiber optic sensors exhibited no observable degradation after exposure. The optical fiber connectors and coatings also showed no observable degradation. In addition to harsh environment survivability, fiber optic sensors offer a number of intrinsic advantages for space nuclear power applications including extremely low mass, immunity to electromagnetic interference, self diagnostics / prognostics, and smart sensor capability. Deploying fiber optic sensors on future space exploration missions would provide a substantial improvement in spacecraft instrumentation.
Fielder Robert S.
Palmer Matthew E.
Slusher David
No associations
LandOfFree
Initial Performance Evaluation of Optical Fibers and Sensors Under High-Energy Electron Beam Irradiation does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Initial Performance Evaluation of Optical Fibers and Sensors Under High-Energy Electron Beam Irradiation, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Initial Performance Evaluation of Optical Fibers and Sensors Under High-Energy Electron Beam Irradiation will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1283097