Other
Scientific paper
Jul 2008
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=2008spie.7018e.101z&link_type=abstract
Advanced Optical and Mechanical Technologies in Telescopes and Instrumentation. Edited by Atad-Ettedgui, Eli; Lemke, Dietrich.
Other
Scientific paper
In the LAMOST project, the unit-holes on the Focal Plane Plate are the final installation location of the optical fiber positioning system. Theirs precision will influence the observation efficiency of the LAMOST. For the unique requirements, the unit-holes on the Focal Plane Plate are composed by a series of tiny angle dimensional holes which dimensional angle are between 16' to 2.5°. According to these requirements, the measurement of the tiny angle dimensional holes for the unit-holes needs to less than 3'. And all the unit-holes point to the virtual sphere center of the Focal Plane Plate. To that end, the angle departure of the unit-holes axis is changed to the distance from the virtual sphere center of Focal Plane Plate to the unit-holes axis. That is the better way to evaluate the technical requirements of the dimensional angle errors. In the measuring process, common measuring methods do not fit for the tiny angle dimensional hole by CMM(coordinate measurement machine). An extraordinary way to solve this problem is to insert a measuring stick into a unit-hole, with a target ball on the stick. Then measure the low point of the ball center and pull out the stick for the high station of center. Finally, calculate the two points for the unit-hole axis to get the angle departure. But on the other hand, use this methods will bring extra errors for the measuring stick and the target ball. For better analysis this question, a series experiments are mentioned in this paper, which testify that the influence of the measure implement is little. With increasing the distance between the low point and the high point position in the measuring process should enhance the accuracy of dimensional angle measurement.
Jin Yi
Xing Xiaozheng
Zhai Chao
Zhou Zengxiang
No associations
LandOfFree
High precise measurement of tiny angle dimensional holes for the unit-holes of the LAMOST Focal Plane Plate does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with High precise measurement of tiny angle dimensional holes for the unit-holes of the LAMOST Focal Plane Plate, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and High precise measurement of tiny angle dimensional holes for the unit-holes of the LAMOST Focal Plane Plate will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-794684