High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak

Details High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak

Sep 1999

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1999aipc..485..462s&link_type=abstract

The thirteenth topical conference on radio frequency power in plasmas. AIP Conference Proceedings, Volume 485, pp. 462-465 (199

Computer Science

2

Plasma Heating By Particle Beams

Scientific paper

The 140GHz, 2MW, 0.5s ECRH system on FTU tokamak integrates closed waveguide transmission lines (~30 m) with quasi optical systems at both ends for efficient coupling from the 4 gyrotrons to the 4 waveguides and from these to the plasma through a single access port. Poloidal and toroidal control of the beam's launching angles and polarization is performed without movable components close to the plasma. Most of the components of each generation and transmission system were designed to operate at a power level higher than 0.5 MW, and a possible up-grade to a full 1 MW, 0.5 s capability is discussed.

Affiliated with

Also associated with

No associations

Rating

High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and High power system for ECRH at 140Ghz, 2MW, 0.5s on FTU tokamak will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-1768237