Fabrication of a reflective Schmidt camera

Details Fabrication of a reflective Schmidt camera Fabrication of a reflective Schmidt camera

Sep 1995

adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1995spie.2536..350l&link_type=abstract

Proc. SPIE Vol. 2536, p. 350-352, Optical Manufacturing and Testing, Victor J. Doherty; H. Philip Stahl; Eds.

Computer Science

Scientific paper

The fabrication and testing of a corrector mirror for a reflective Schmidt camera is to be presented. With a reflective corrector, the incident beam has to be off-axis. The corrector is tilted at an angle of 30 degrees with the optical axis to implement this requirement. The figure of the corrector, which composes of the toric term, rotational symmetrical and rotational nonsymmetrical aspherical terms, poses a certain degree of challenge for fabrication. The total correction is 46 waves peak to valley at 632.8 nm wavelength.

Affiliated with

Also associated with

No associations

Rating

Fabrication of a reflective Schmidt camera does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Fabrication of a reflective Schmidt camera, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Fabrication of a reflective Schmidt camera will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-990532