Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses

Details Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses

2008-11-19

arxiv.org/abs/0811.3201v1

Astronomy and Astrophysics

Astrophysics

6 pages, 17 figures, 2008 IEEE NSS/MIC conference, Dresden

Scientific paper

The main methods grown Cadmium Zinc Telluride (CZT) crystals with high yield and excellent homogeneity are Modified Horizontal Bridgman (MHB) and High Pressure Bridgman (HPB) processes, respectively. In this contribution, the readout system based on two 32-channel NCI-ASICs for pixellated CZT detector arrays has been developed and tested. The CZT detectors supplied by Orbotech (MHB) and eV products (HPB) are tested by NCI-ASIC readout system. The CZT detectors have an array of 8x8 or 11x11 pixel anodes fabricated on the anode surface with the area up to 2 cm x2 cm and the thickness of CZT detectors ranges from 0.5 cm to 1 cm. Energy spectra resolution and electron mobility-lifetime products of 8x8 pixels CZT detector with different thicknesses have been investigated.

Affiliated with

Also associated with

No associations

Rating

Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.

If you have personal experience with Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Fabrication and Test of Pixelated CZT Detectors with Different Pixel Pitches and Thicknesses will most certainly appreciate the feedback.

Rate now

Comments { 0 }

Profile ID: LFWR-SCP-O-667276