Computer Science – Performance
Scientific paper
Jan 1993
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1993spie.1742..464b&link_type=abstract
In: Multilayer and grazing incidence X-ray/EUV optics for astronomy and projection lithography; Proceedings of the Meeting, San
Computer Science
Performance
Fabrication, Gratings (Spectra), Laminates, Performance Tests, X Ray Spectra, Gold Coatings, High Resolution, Optical Reflection, Spectral Resolution
Scientific paper
Two types of linear multilayer gratings have been investigated with special attention on the influence of the fabrication method on performance. Rh/C and Mo/Si systems have been realized for use above the carbon K-edge at 43.6 A and the silicon L3 edge at 125 A, respectively. We analyzed in detail the performance of the multilayer coatings in relation with their structural behavior. Mo/Si amplitude gratings were manufactured by suppressing the soft X-ray reflectivity of the multilayer mirror in selective areas with gold coating and lift off process. This method provides a well-defined 3 micron period Au grating. The soft X-ray reflectivity of the multilayer alone reached a maximum of 45 percent at normal incidence, whereas it was measured around 12.5 percent after Au grating deposition. Up to 13 grating orders were detected in the grating scan and detector scan showing the very good quality of these structures. A more unusual method was applied to manufacture Rh/C multilayer gratings. A carbon grating was first patterned on a silicon substrate and the multilayer was deposited at the end of the process. Measured reflectivity around 60 A in conventional 0 - 20 scan shows a reduction of the performances by a factor three. This is probably due to the surface roughness of the carbon grating prior to the multilayer deposition.
Bac S.
Boher P.
Houdy Ph.
Krumrey Michael
Ladan F.-R.
No associations
LandOfFree
Fabrication and performance of linear multilayer gratings in the 44-130 A wavelength range does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Fabrication and performance of linear multilayer gratings in the 44-130 A wavelength range, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Fabrication and performance of linear multilayer gratings in the 44-130 A wavelength range will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1265802