Computer Science – Performance
Scientific paper
May 1999
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1999spie.3669...57b&link_type=abstract
Proc. SPIE Vol. 3669, p. 57-63, Smart Structures and Materials 1999: Electroactive Polymer Actuators and Devices, Yoseph Bar-Coh
Computer Science
Performance
2
Scientific paper
NASA is seeking to reduce the mass, size, consumed power, and cost of the instrumentation used in its future missions. An important element of many instruments and devices is the actuation mechanism and electroactive polymers (EAP) are offering an effective alternative to current actuators. In this study, two families of EAP materials were investigated, including bending ionomers and longitudinal electrostatically driven elastomers. These materials were demonstrated to effectively actuate manipulation devices and their performance is being enhanced in this on-going study. The recent observations are reported in this paper, include the operation of the bending-EAP at conditions that exceed the harsh environment on Mars, and identify the obstacles that its properties and characteristics are posing to using them as actuators. Analysis of the electrical characteristics of the ionomer EAP showed that it is a current driven material rather than voltage driven and the conductivity distribution on the surface of the material greatly influences the bending performance. An accurate equivalent circuit modeling of the ionomer EAP performance is essential for the design of effective drive electronics. The ionomer main limitations are the fact that it needs to be moist continuously and the process of electrolysis that takes place during activation. An effective coating technique using a sprayed polymer was developed extending its operation in air from a few minutes to about four months. The coating technique effectively forms the equivalent of a skin to protect the moisture content of the ionomer. In parallel to the development of the bending EAP, the development of computer control of actuated longitudinal EAP has been pursued. An EAP driven miniature robotic arm was constructed and it is controlled by a MATLAB code to drop and lift the arm and close and open EAP fingers of a 4-finger gripper.
Bar-Cohen Yoseph
Harrison Joycelyn S.
Leary Sean P.
Shahinpoor Mohsen
Smith Jeffrey J.
No associations
LandOfFree
Electroactive polymer (EAP) actuators for planetary applications does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Electroactive polymer (EAP) actuators for planetary applications, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Electroactive polymer (EAP) actuators for planetary applications will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1194391