Other
Scientific paper
Apr 1996
adsabs.harvard.edu/cgi-bin/nph-data_query?bibcode=1996apopt..35.1673h&link_type=abstract
Applied Optics, Volume 35, Issue 10, April 1, 1996, pp.1673-1678
Other
2
Glass And Other Amorphous Materials, Materials, Optical Materials
Scientific paper
The dimensional stabilities of five commercially available low-expansion glass ceramics have been measured between -40 degrees C and +90 degrees C. Materials tested include Zerodur, Zerodur M, Astrositall, Clearceram 55, and Clearceram 63. With the use of a standardized thermal testing procedure, the thermal expansion, isothermal shrinkage, and hysteresis behavior of the various materials are compared with one another. A detailed comparison of three separate melts of Astrositall, two separate melts of Zerodur, and one melt of Zerodur M indicates that between -40 degrees C and +90 degrees C the dimensional stability and uniformity characteristics of two of the melts of Astrositall are somewhat better than those of the other two materials. To my knowledge, this is the first published comparison of data from these glass ceramics taken with identical test procedures.
No associations
LandOfFree
Dimensional stability tests over time and temperature for several low-expansion glass ceramics does not yet have a rating. At this time, there are no reviews or comments for this scientific paper.
If you have personal experience with Dimensional stability tests over time and temperature for several low-expansion glass ceramics, we encourage you to share that experience with our LandOfFree.com community. Your opinion is very important and Dimensional stability tests over time and temperature for several low-expansion glass ceramics will most certainly appreciate the feedback.
Profile ID: LFWR-SCP-O-1335122